RGT86010CJ-DG

JEEP 4X4 RTR 1:10 WATERPROOF CRAWLER DARK GREY RGT86010CJ-DG

Product info:

The evolution of the Rock Cruiser chassis hits new heights with the RGT86110, RGT86010CJ & RGT86010JK editions. As trail and crawler fans continue to crave both scale performance and scale looks, we have looked to address both with these models.

Featuring a new split transmission, the motor is now mounted directly above the front axle alongside the steering servo providing extra weight up front for better traction when climbing ascents. The steering angle has been increased to a 42° angle for further improved trail maneuverability. An adjustable drivetrain slipper can be set to protect the transmission and driveshafts in the event of a lock up, while internal axle and gearbox metal gears provide long term durability.

The split transmission layout provides a much lower centre section allowing for aftermarket interiors to be mounted for added scale realism. The moulded side chassis plates have aluminium plates on the exterior while the inner plates provide protection from the elements as well as mounting receiver and speed control. The moulded receiver box features additional plug in ports for LED lights and aftermarket winches.

The classic Jeep inspired bodyshell comes complete with roll bar cage front and rear bumpers feature mounted LED lights to top off that scale look.

The vehicle is equipped with ball bearing, C-type steel chassis rail, and locked-shaft in front and real differential. With the high-level link angle and the high-precision CVA, the newly designed steering arm could reach the maximum steering angle - 42°. Where people will focus on and expect is the motor mount in the front, and the reduction in the front. The front bias design could provide more effective traction for the front wheel, and effectively reduce the possibility of rollover when passing through high-angle slopes. The main gear of transmission system uses the slipper design. Also, all the gear of the transmission are made of high-strength powder alloy, in order to solve the tooth issue under condition of super-strong resistance and load.

The RGT86110, RGT86010CJ & RGT86010JK editions will be in RTR version for customer, and equipped with 17T RC super-strong torque motor, waterproof crawler ESC, 15KG high torque waterproof servo, and 7.2V 2000MAH NiMh battery. These models come with the 4-channel Radio controller, which is specially designed for Crawler. The special transmitter give support to the third channel to control the lamp switch, and the forth channel to retract the winch (optional). RGT team has been focusing on the RC crawler research and development for many years, and has been trying to short the distance between RC model and the public, and provide more highly cost-effective RC products for the public.

 

Features

  • 4ch 2.4ghz radio for lights & winch options
  • WP-1040 40A Waterproof ESC
  • 15kg metal geared waterproof servo
  • 550 brushed 17 Turn motor
  • 7.2v 2000mah NiMH battery & charger
  • Ball bearings
  • Twin rail metal frame chassis
  • 6mm steel multi-link suspension
  • Telescopic universal driveshafts
  • Steel CVA front universal driveshafts
  • Oil filled shock absorbers
  • Metal axle & transmission gears
  • Front & rear high clearance locked axles
  • Adjustable central footplate for ESC & receiver mounting
  • Receiver box with external third & forth channel ports for options such as LED, sound module or winch
  • Split transmission system for better low-speed torque output
  • Lower mid section accommodates interiors
  • Transmission slipper clutch
  • Raised chassis mounted steering servo & panhard bar
  • Front mounted motor for better weight bias
  • Scale styled wheels
  • High grip all terrain tyres
  • Scale looking front & rear bumpers with shackles & factory fitted LED lights

 

Specifications:

  • Length: 560mm
  • Width: 240mm
  • Height: 240mm
  • Weight: 2600g
  • Wheelbase: 313mm
  • Gear Ratio: 56.6:1 – 33.3:1
  • Tyre Diameter: 120mm
  • Wheel Diameter: 54mm
  • Ground Clearance: 80mm

 

Please Note: This kit requires 4 x AA batteries for completion.

 
More info

The evolution of the Rock Cruiser chassis hits new heights with the RGT86110, RGT86010CJ & RGT86010JK editions. As trail and crawler fans continue to crave both scale performance and scale looks, we have looked to address both with these models.

Featuring a new split transmission, the motor is now mounted directly above the front axle alongside the steering servo providing extra weight up front for better traction when climbing ascents. The steering angle has been increased to a 42° angle for further improved trail maneuverability. An adjustable drivetrain slipper can be set to protect the transmission and driveshafts in the event of a lock up, while internal axle and gearbox metal gears provide long term durability.

The split transmission layout provides a much lower centre section allowing for aftermarket interiors to be mounted for added scale realism. The moulded side chassis plates have aluminium plates on the exterior while the inner plates provide protection from the elements as well as mounting receiver and speed control. The moulded receiver box features additional plug in ports for LED lights and aftermarket winches.

The classic Jeep inspired bodyshell comes complete with roll bar cage front and rear bumpers feature mounted LED lights to top off that scale look.

The vehicle is equipped with ball bearing, C-type steel chassis rail, and locked-shaft in front and real differential. With the high-level link angle and the high-precision CVA, the newly designed steering arm could reach the maximum steering angle - 42°. Where people will focus on and expect is the motor mount in the front, and the reduction in the front. The front bias design could provide more effective traction for the front wheel, and effectively reduce the possibility of rollover when passing through high-angle slopes. The main gear of transmission system uses the slipper design. Also, all the gear of the transmission are made of high-strength powder alloy, in order to solve the tooth issue under condition of super-strong resistance and load.

The RGT86110, RGT86010CJ & RGT86010JK editions will be in RTR version for customer, and equipped with 17T RC super-strong torque motor, waterproof crawler ESC, 15KG high torque waterproof servo, and 7.2V 2000MAH NiMh battery. These models come with the 4-channel Radio controller, which is specially designed for Crawler. The special transmitter give support to the third channel to control the lamp switch, and the forth channel to retract the winch (optional). RGT team has been focusing on the RC crawler research and development for many years, and has been trying to short the distance between RC model and the public, and provide more highly cost-effective RC products for the public.

 

Features

  • 4ch 2.4ghz radio for lights & winch options
  • WP-1040 40A Waterproof ESC
  • 15kg metal geared waterproof servo
  • 550 brushed 17 Turn motor
  • 7.2v 2000mah NiMH battery & charger
  • Ball bearings
  • Twin rail metal frame chassis
  • 6mm steel multi-link suspension
  • Telescopic universal driveshafts
  • Steel CVA front universal driveshafts
  • Oil filled shock absorbers
  • Metal axle & transmission gears
  • Front & rear high clearance locked axles
  • Adjustable central footplate for ESC & receiver mounting
  • Receiver box with external third & forth channel ports for options such as LED, sound module or winch
  • Split transmission system for better low-speed torque output
  • Lower mid section accommodates interiors
  • Transmission slipper clutch
  • Raised chassis mounted steering servo & panhard bar
  • Front mounted motor for better weight bias
  • Scale styled wheels
  • High grip all terrain tyres
  • Scale looking front & rear bumpers with shackles & factory fitted LED lights

 

Specifications:

  • Length: 560mm
  • Width: 240mm
  • Height: 240mm
  • Weight: 2600g
  • Wheelbase: 313mm
  • Gear Ratio: 56.6:1 – 33.3:1
  • Tyre Diameter: 120mm
  • Wheel Diameter: 54mm
  • Ground Clearance: 80mm

 

Please Note: This kit requires 4 x AA batteries for completion.

 
Data sheet
CategoryCrawler
AssemblingReady To Run
SurfaceOff Road
Scale1/10
Drivetrain4WD
 
Custom tab

This is a custom block edited from admin panel.You can insert any content here.

30 other products in the same category:

Customers who bought this product also bought: